Home > Products > Scintillator Detector SHARE THIS:

CsI(Tl) Detector, PD assembled

Good energy resolution
Low cost Request A Quote

CsI(Tl) Cesium Iodine doping thallium is the most typical alkali halide scintillation crystal which wavelength is 550nm, It's best matchable for PD, SiPM etc. CsI(Tl) has high density, High Z, No cleavage plane, excellent detection effiency, it's widely used in high energy physics, Nuclear detector, Space detection, security inspection,SPECT and container checking etc.
Specification:

Density [g/cm³]	4.51
Melting point [K]	894
Thermal expansion coefficient [K^-1]	54 x 10^-6
Cleavage plane	none
Mohs hardness (Mho)	2
Hygroscopic	Slightly
Wavelength [nm]	550
Lowest cut off wavelength [nm]	320
Refractive index	1.79
Decay time [µs]	1
Afterglow (after 6ms) [%]	0.5 - 5.0
Light yeild [photons/MeVγ]	52- 56 x10³
Photoelectron yeild ratio [% of NaI(Tl)] (y rays)	45

NaI(Tl) Detector, FWHM 7%

CsI(Tl) detector, PMT Assembled, FWHM 7.5%

LaBr3:Ce detector, FWHM 3%

CdWO4 Detector,CWO detector PD assembled

LaCl3:Ce detector, FWHM 4.5%

CeBr3 Detector

Request A Quote

Your Name(required)

Email(required)

Phone(required)

Messages(required)

Captcha(required)

Products

Hot products